| Customization: | Available |
|---|---|
| After-sales Service: | 18 Months Warranty |
| Warranty: | 18 Months |
|
Still deciding? Get samples of US$ 699/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This membrane dissolved oxygen online analyzer is an intelligent online chemical analysis instrument, which is widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemistry, food and tap water industries. The dissolved oxygen meter mainly monitors the oxygen content/saturation/oxygen partial pressure and temperature in the solution continuously. The continuous monitoring data is connected to the recorder through the transmission output to realize remote monitoring and recording, and can also be connected to the RS485 interface to communicate with the computer through the Modbus-RTU protocol, so as to realize computer monitoring and recording of the instrument.
| Enter | Measured variables | Oxygen content, saturation, oxygen partial pressure, temperature |
| Measuring range | Oxygen content: (0~20) mg/L Saturation: 0~200% Oxygen partial pressure: (0~400) hPa Temperature: (-10~60)ºC |
|
| Output | Transmitter output | Isolated, (4-20) mA can be set to correspond to oxygen content, saturation or oxygen partial pressure measurement range, maximum load 750Q, output accuracy 0.2%FS |
| Communication output | Isolated, RS485 output, Modbus-RTU communication protocol | |
| Alarm output | 2-way SPDT, normally open and normally closed, contact capacity 250VAC, 3A | |
| power supply | Power supply | 220VAC±10%,50Hz/60Hz |
| Power consumption | Maximum power consumption 5W | |
| Electrical interface | M12*1.5 cable plug*1,M16*1.5 cable plug*2 | |
| Performance Parameters | Reference operating conditions | 25ºC |
| Accuracy | Oxygen content/saturation/oxygen partial pressure: ±1.5%FS NTC10K: ±0.5ºC Pt1000: ±0.5ºC |
|
| Temperature compensation | NTC10K/Pt1000 automatic temperature compensation/manual temperature compensation | |
| Protection level | IP54 |
1.Photoelectric isolation (4~20) mA transmission output, strong anti-interference ability.
2.Photoelectric isolation RS485 communication
3.Manual and automatic temperature compensation functions.
4.High and low alarm functions and hysteresis can be set.
5.Buzzer and LCD backlight can be turned on and off.
Q:What kind of product do you supply?
){kind=link}